Navegando por Autor "SIQUEIRA, Jacilene Siqueira de"

Agora exibindo 1 - 2 de 2

Acesso aberto (Open Access)
Reaproveitamento de cinzas de carvão mineral na formulação de argamassas
(2012-06) SIQUEIRA, Jacilene Siqueira de; SOUZA, Célio Augusto Gomes de; SOUZA, José Antônio da Silva
This paper aims to study the ash incorporation from the combustion of coal in fluidized bed boilers, in production of mortar, replacing part of cement. Specimens were prepared using Portland cement to the specifications CPII-E-32 of normal characteristics and classification of sand below 100 mesh. Blends in the 4:1 ratio, that is, 4 parts of aggregate to 1 part of cement, with insertion of ashes in the proportions 0, 10, 20, 30, 40 and 50%. The mortar was developed in mixing and casting was made in a mold of 5 cm x 10 cm. The behavior of compressive strength was evaluated after 28 days; the strength decreases with increasing percentage of ash. Additional analysis was carried out by X-ray diffraction, and it was found that the substitution of this waste can be successfully used in mortars with blends of up to 30%.
Acesso aberto (Open Access)
Reciclagem de resíduo a partir de cinzas de carvão mineral: produção de argamassas
(Universidade Federal do Pará, 2001-07-06) SIQUEIRA, Jacilene Siqueira de; SOUZA, José Antônio da Silva; http://lattes.cnpq.br/6157348947425968; SOUZA, Célio Augusto Gomes de; http://lattes.cnpq.br/0800747860976046
This work aims to evaluate the possibility of use of waste obtained from the combustion of coal in fluidized bed boilers, an alumina refinery in Pará state. In this context, we evaluated the incorporation of fly ash as pozzolan, to partially replace cement in mortar production. To that end, samples were prepared using Portland cement type CPII-E-32. The mixtures were in the ratio 4:1, that is 4 parts aggregate (silica) and 1 part of binder (cement and ash), with the inclusion of the ash of 10, 20, 30, 40 and 50 percentage with respect to the cement, beyond the mortar without addition. We defined two relation water / binder, 0,4 and 0,8. After 7 and 28 days curing time, were tested for compressive strength analysis of behavior. In addition, the mortar with the water / binder 0.8 were subjected to further analysis of X-ray diffraction, scanning electron microscopy, water absorption, porosity and bulk density, the results obtained were consistent when compared with literature data, showing that viable application of ash studied in the construction industry.