Programa de Pós-Graduação em Química - PPGQ/ICEN
URI Permanente desta comunidadehttps://repositorio.ufpa.br/handle/2011/4046
O Programa de Pós-Graduação em Química (PPGQ) do Instituto de Ciências Exatas e Naturais (ICEN) da Universidade Federal do Pará (UFPA). Oferece oportunidade para a formação de Mestres e Doutores nas áreas de Química Orgânica, Físico-Química, Inorgânica e Analítica.
Navegar
Navegando Programa de Pós-Graduação em Química - PPGQ/ICEN por CNPq "CNPQ::CIENCIAS EXATAS E DA TERRA::QUIMICA::QUIMICA INORGANICA"
Agora exibindo 1 - 4 de 4
- Resultados por página
- Opções de Ordenação
Item Acesso aberto (Open Access) Atividade e estabilidade de catalisador à base de carbono sulfonado na reação de esterificação: influência da temperatura de pirólise no processo de funcionalização(Universidade Federal do Pará, 2021-08-25) CORRÊA, Ana Paula da Luz; CONCEIÇÃO, Leyvison Rafael Vieira da; http://lattes.cnpq.br/7467898936995220In the present study, the pyrolysis temperature on the activity and catalytic stability of sulfonated biochars, from the agroindustrial waste of murumuru kernel shell, was evaluated in the esterification reaction of oleic acid with methanol. In view of the investigation of factors related to catalytic functionalization and its impact on reuse processes, carbonaceous materials were synthesized by direct pyrolysis under different carbonization temperatures, at 450, 600 and 750 °C. The process of biochars functionalization was carried out by sulfonation with concentrated sulfuric acid at 200 °C and 4 h. The materials were characterized in terms of determining the density of sulfonic groups, Scanning Electron Microscopy (SEM), Energy Dispersion X-Ray Spectroscopy (EDS), Elemental Analysis (CNHS), Fourier Transform Infrared Spectroscopy (FT- IR), Raman Spectroscopy, Thermogravimetric Analysis (TG) and X-Ray Excited Photoelectron Spectroscopy (XPS). The influence of the variables temperature and reaction time on the catalytic performance and reuse capacity of the catalysts was also evaluated. The data obtained showed that the functionalization with sulfonic groups occurred directly in the carbon chain of the biochars, higher temperatures carbonization resulted in more stable polycondensed carbonaceous catalysts and a higher degree of structural order. The carbonized catalyst at 750 °C achieved the conversion of oleic acid in the esterification reactions of 98.37% and maintained in the third reaction cycle conversion of 89.30%. Such a catalyst also has the highest content of sulfur groups, even after reuse processes. The increase in temperature and time in the reaction medium was able to improve the reuse capacity of relatively low stability catalysts. Thus, these results show the impact of the pyrolysis temperature in obtaining catalysts with greater activity and catalytic stability in the esterification reactions, and in this way provide great support for the development of new heterogeneous sulfonated carbon-based catalysts, applied in the biodiesel production process. Furthermore, they corroborate the high potential for using the residual biomass of murumuru kernel shell in the development of a new material.Item Acesso aberto (Open Access) Preparação e avaliação de catalisador heterogêneo ácido baseado em óxido de grafeno funcionalizado para síntese de biodiesel(Universidade Federal do Pará, 2021-09-24) SILVA, Paula Maria Melo da; CONCEIÇÃO, Leyvison Rafael Vieira da; http://lattes.cnpq.br/7467898936995220The present study aims at the synthesis of a heterogeneous acid catalyst derived from graphene oxide, applied in the transesterification reaction of soybean oil to obtain biodiesel. The graphene oxide catalytic support was synthesized from graphite oxidation and the catalyst was functionalized by impregnation of molybdenum trioxide (MoO3) as the active phase. The synthesis of the support and the catalyst was confirmed through the characterization techniques of Fourier Transform Infrared Spectroscopy (FT-IR), Thermogravimetric Analysis (TG/DTG), Scanning Electron Microscopy (SEM), Energy Dispersion X-Ray Spectroscopy (EDS) and XRay Diffraction (DRX). The catalytic tests optimization of the transesterification reactions had as parameters evaluated the temperature in the range of 120–160 °C, the time between 1–5 h, the catalyst concentration comprised in 10% (m/m) and molar ratio oil/ alcohol in the range of 25:1–45:1. The reaction studies evidenced as an optimum point the temperature of 140 °C, time of 5 h, catalyst concentration 6% (m/m) and molar ratio of 35:1, leading to the obtainment of a biodiesel with an ester content above 90%. The catalyst also maintained its catalytic activity even in the seventh reaction cycle. Therefore, the results obtained demonstrate that the graphene oxide catalyst supported by MoO3 is a new and promising heterogeneous acid catalyst with high catalytic efficiency in the transesterification reaction for the biodiesel synthesis.Item Acesso aberto (Open Access) Síntese de biodiesel utilizando catalisador bifuncional baseado em ferrita com óxido metálico suportado(Universidade Federal do Pará, 2021-07-23) GONÇALVES, Matheus Arrais; CONCEIÇÃO, Leyvison Rafael Vieira da; http://lattes.cnpq.br/7467898936995220In this study, a solid magnetic acid catalyst MoO3/SrFe2O4, composed of molybdenum oxide (MoO3) supported on strontium ferrite (SrFe2O4), was synthesized and applied in the transesterification of waste cooking oil (WCO). The catalyst was characterized by acid-base titration method in order to determine Surface acidity, Thermogravimetric analysis (TG/DTG), X-ray diffraction (XRD), Fourier transformed infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), Energy dispersion X-ray spectroscopy (EDS) and Vibrating sample magnetometry (VSM) techniques. A central composite design of centered face 24 (FCCD) and a mathematical model was developed in order to describe the behavior of the ester content as a function of the independent variables temperature, alcohol:oil molar ratio, catalyst dosage and time reaction. The mathematical model (R2=0.9900) was validated and showed a relative error below 5% between the experimental and predicted values. Using linear regression methods and response surface methodology (RSM) the conditions of biodiesel synthesis reaction were optimized and 95.4% conversion into esters was obtained from the use of the reaction temperature of 164 °C, alcohol:oil molar ratio of 40:1, catalyst dosage of 10% and reaction time of 4 h . The catalyst showed high reusability, since it was possible to use it in 8 reaction cycles which it is an indication of its good prospectus for development and application as bifunctional catalyst.Item Acesso aberto (Open Access) Síntese de catalisador heterogêneo magnético básico aplicado no processo de produção de biodiesel(Universidade Federal do Pará, 2023-08-30) SANTOS, Hiarla Cristina Lima dos; CONCEIÇÃO, Leyvison Rafael Vieira da; http://lattes.cnpq.br/7467898936995220This research focus on the development of a basic magnetic heterogeneous catalyst, using, for the first time, NaAlO2 as an active species supported in a magnetic material, CuFe2O4, being highly stable and effective to produce value-added products, such as biodiesel. With this purpose, a series of catalysts (x-NaAlO2/CuFe2O4) have been successfully synthesized by means of conventional and low-cost methods, such as coprecipitation and impregnation, each one being assessed in the soybean oil transesterification reaction. The features of the 25-NaAlO2/CuFe2O4 catalyst with the higher performance have been elucidated through techniques such as basicity by acid-base titration method, XRD, FTIR, SEM, EDS, TG/DTG and VSM. To optimize the biodiesel’s ester content, the face-centered central composite design (FCCD), integrated with the response surface methodology (RSM), was employed to assess the effect of the following aspects on the process: reaction temperature, MeOH:oil molar ratio, catalyst dosage and reaction time. The regression model presented R2 = 0.9394 and experimentally reached a maximum ester content of 95.9% (relative error < 5%) attributed to the biodiesel attained under the following optimal reaction conditions: temperature of 95 °C, MeOH:oil molar ratio of 13:1, catalyst dosage of 8% and time of 60 min. The NaAlO2/CuFe2O4 catalyst presented a stable catalytic performance during four transesterification cycles (>90.0%) and an efficient magnetic property for the catalyst separation and recovery process (Ms = 23.62 emu g-1). The results showed that the biodiesel’s physicochemical properties were in compliance with ASTM D6751 standard. Finally, this extensive study reveals the basic magnetic heterogeneous catalyst NaAlO2/CuFe2O4 as a practical and promising alternative to produce a sustainable biofuel.