Navegando por Assunto "Desirability function"

Agora exibindo 1 - 3 de 3

Acesso aberto (Open Access)
Análise experimental da secagem do corante hidrossolúvel de urucum (Bixa orellana L.) em leito de jorro
(Universidade Federal do Pará, 2016-02-15) SILVA, Adriano Gomes Paixão da; FARIA, Lênio José Guerreiro de; http://lattes.cnpq.br/7428609361678173; https://orcid.org/0000-0002-9534-9998; COSTA, Cristiane Maria Leal; http://lattes.cnpq.br/0581730621014796
The water-soluble dye annatto norbixin salt is mainly used in the pharmaceuticals industry, cosmetics and especially in industrial food sector in breads, sausages, yogurts, confectionery, pasta, cheese, sandwich cookies, juice concentrates and others. The low toxicity and its coloring ability make the annatto norbixin salt a very attractive and convenient dye, replacing many synthetic dyes. These characteristics encourage to seek ways to facilitate the use of natural dyes in the various segments of industry, as well as promoting research about obtaining in order to get a product with the desired characteristics and qualities. This work it is carried out experimental analysis of water soluble dye drying annatto (Bixa orellana L.) in spouted bed, using cassava starch as a carrier agent and particles of low-density poliestileno (LDPE) as an inert material. The extraction of the dye was carried out by immersion and agitation of annatto seeds in 5% potassium hydroxide solution. It is statistically evaluated the influence of the drying process input variables, temperature (70, 80 and 90 ° C), atomization pressure (10, 15 and 20 psi), and atomization of the suspension flow (10, 7 and 8.5 mL/min) one the response variables: efficiency (η), moisture content (U) and norbixin salt content of the dye powder (S), using Statistica®7.0 application. The estimate of the optimum condition of drying within the analyzed experimental area is determined based on the input variables applying the concept of global desirability. The conditions in this work, it was reached a optimum value of Desirability Function considered as very good and that matches the temperature of the drying air 82.6 °C, atomization pressure of 13.7 psi and flow of suspension dye 10 ml / min, generating satisfactory values for the response variables corresponding to 71.69 % yield, 0.06161 g H2O/g dry solids of moisture and 2.3605 % dye of norbixin salt powder.
Acesso aberto (Open Access)
Avaliação da qualidade de sementes Vigna unguiculata (L.) Walp após processo de secagem em leito de jorro
(Universidade Federal do Pará, 2015-03) CORUMBÁ, Lorena Gomes; COSTA, Cristiane Marial Leal; http://lattes.cnpq.br/0581730621014796; FARIA, Lênio José Guerreiro de; http://lattes.cnpq.br/7428609361678173
The variety of cowpea (Vigna unguiculata L. Walp.), known as manteiguinha beans, is native from Amazon region, the cultivation is mainly done by small producers dominated by family farms. The physiological quality of manteiguinha bean seeds, in concern to the germination and emergence rate index are directly connected to the moisture content of the seeds. Therefore, are required studies to evalute the behavior of seeds such as beans their potential hygroscopic and drying conditions. In intention for contribute to improvements in agricultural productivity cowpea, the main objective of this study was to qualitative evaluate of manteiguinha beans seeds behind drying process in conventional spouted bed. In this context, it was first defined the physical, chemical and physiological characteristics of fresh seed according to obtain their moisture sorption isotherms at temperatures of 40, 55 and 70 °C. The thermodynamic parameters of sorption, as isosteric heat, and entropy change in Gibbs free energy were evaluated from the GAB model and through Clausius-Clapeyron and Gibbs-Helmholtz relations. The compensation theory enthalpy-entropy was properly applied to the isotherms indicating that the moisture sorption phenomenon in manteiguinha bean seeds is controlled by enthalpy. To carry on the drying process were defined operating conditions of the spouted bed trhough fluidodynamics parameters analysis (maximum pressure drop, pressure drop in stable spout, pressure drop in the minimum spouting and the minimum spouting velocity). In carry out of the drying tests were applied to experimental design technique Box-Behnken and through statistical analysis of the experimental data was possible to evaluate the influence of input variables: air temperature (Tar), air velocity (Uar) and time drying (t) on the responses, moisture ratio (XR), germination percentage (G) and emergence speed index (ESI). The optimal point of the drying process, estimated by global desirability function obtained when the bed particles operated at temperature and drying air rate of 57 °C and 0.934 m / s, respectively, for a period of 240 minutes. These conditions are obtained seeds with final humidity 0,12 kg water/ kg dry solid, germination of 82.53% and 14.73 and emergence speed index.
Acesso aberto (Open Access)
Definição de condições ótimas para o processo de secagem em spray dryer da polpa de buriti (Mauritia flexuosa L.)
(Universidade Federal do Pará, 2022-02-09) CRUZ, Tatyane Myllena Souza da; MEDEIROS, Heloisa Helena Berredo Reis de; http://lattes.cnpq.br/9067574515452039; https://orcid.org/0000-0002-5234-840X; PENA, Rosinelson da Silva; http://lattes.cnpq.br/3452623210043423
Buriti (Mauritia flexuosa) is a native fruit of the Amazon, known for its functional potential, attributed to a high concentration of carotenoids. The spray drying process, in turn, can transform solution, suspensions or pastes into small droplets, which in contact with hot air produce powders with characteristics that favor the preservation of the product, in addition to facilitating storage and the transport. Thus, the objective of this work was to optimize the drying process of buriti pulp, in spray dryer, aiming to obtain a powdered product with desirable characteristics. For this, a central composite rotatable design (CCRD) was used to determine the influence of the variables: drying air temperature (130 – 190 °C), feed flow (7 – 17 mL/min) and carrier agent concentration (20 – 60%), on the product properties: moisture, water activity (aw), hygroscopicity, total carotenoid content, water solubility index (WSI) and the instrumental color parameter b* (fruit characteristic color parameter). To ensure the stability of the emulsion in the suspension, soy lecithin was added to all formulations, in the amount of 5% in relation to the dry matter of the sample. The response surface methodology (RSM) and the desirability function defined as optimal conditions for the drying process of buriti pulp: a gum arabic concentration of 60%, feed flow rate of 17 mL/min and drying air temperature of 190 °C; in the experimental domain. Under these conditions, the powder obtained had the following characteristics: 0.62 g/100 g moisture, aw of 0.16, hygroscopicity of 18.79 g/100 g, carotenoid content of 60.92 µg/g, ISA of 80.26% and a value of 31.32 for the chromaticity parameter b*.