Logo do repositório
Tudo no RIUFPA
Documentos
Contato
Sobre
Ajuda
  • Português do Brasil
  • English
  • Español
  • Français
Entrar
Novo usuário? Clique aqui para cadastrar. Esqueceu sua senha?
  1. Início
  2. Pesquisar por Assunto

Navegando por Assunto "Dolomita"

Filtrar resultados informando as primeiras letras
Agora exibindo 1 - 3 de 3
  • Resultados por página
  • Opções de Ordenação
  • Carregando...
    Imagem de Miniatura
    ItemAcesso aberto (Open Access)
    Beneficiamento de uma argila tipo paligorskita da bacia de S. Luis-Grajaú, região de Alcântara, MA, e sua utilização como adsorvente de fósforo
    (2014-03) RODRIGUES, Gabriela Monice Arruda; NEVES, Roberto de Freitas; ANGÉLICA, Rômulo Simões
    This study used a sample from the basin of S. Luís-Grajaú, Maranhão state, Brazil,consisting of a mixture of predominantly palygorskite and dolomite, approaching the existence of this new occurrence, suggesting a processing method and its application as phosphorus adsorbent, once dolomite is a pH soil corrector while palygorskite has the function of nutrients carrier. First, chemical and mineralogical characterizations were performed by X-ray diffraction, X-ray fluorescence, scanning electron microscopy and separation of sand, silt and clay fractions. Sedimentation and phosphorus adsorption experiments were also performed, with determination of kinetic curve. After the X-ray diffraction analysis, results show that the sample consists mainly of palygorskite and dolomite. Illite, chlorite and quartz are also determined. It was also possible to see that the different types of disaggregation used show no significant differences in the diffraction patterns of the samples. The sand-silt-clay separation, although it is only based on the size of the material, showed a reasonable efficiency for material separation, as the sedimentation tests, where it was noticed that after 24 h, dolomite had disappeared from the supernatant. Determination of the kinetic curve revealed that the adsorption period of 2 h is not sufficient for phosphorus adsorption, requiring 24 h to reach the reaction equilibrium. Sorption tests showed efficiency higher than 91% of the initial phosphorus in solution, and the maximum quantity adsorbed per gram of sample was 0.607 mg. The correlation with the adsorption isotherm models studied, showed better results for Langmuir-Freundlich isotherm, with correlation coefficient of 0.9993, which can be attributed to the fact that adsorption occurs in more than one layer.
  • Carregando...
    Imagem de Miniatura
    ItemAcesso aberto (Open Access)
    Beneficiamento de uma argila tipo palygorskita da Bacia de São Luis-Grajaú, região de Alcântara (MA) e sua utilização como adsorvente de fósforo.
    (Universidade Federal do Pará, 2012-09-04) ARRUDA, Gabriela Monice; NEVES, Roberto de Freitas; http://lattes.cnpq.br/9559386620588673
    The estimated contribution of the industry minerals in Brazil is about 70% of National Mineral Production Value. These minerals are important because of its diverse applications. Among them, in clay minerals group, there is palygorskite, which presents the requirements to join special clays group, once their occurrence is restricted. Thus, this new mineral occurrences deserve attention and further study. Adding to this, there is the fact in the Amazon region, as well as in most areas of tropical and temperate zones, the acidity is an important factor in land degradation and represent one of the major problems faced by agriculture. Acid soils have several limitations, which hinders the use of nutrients, requiring the addition of fertilizers, always aiming maximum efficiency. In this context, this study used a sample from the Bacia de São-Luis-Grajaú, Maranhão State, consisting of a mixture which is predominantly palygorskite and dolomite, approaching the existence of this new occurrence, suggesting a processing method and its application as phosphorus adsorbent, once dolomite is a pH soil corrector, while palygorskite has the function of nutrients carrier. First, chemical and mineralogical characterizations were performed, by XRD, XRF, SEM and separation of sand, silt and clay fractions. Sedimentation and phosphorus adsorption experiments were also performed, with determination of kinetic curve. After the analysis of XRD, results shown that the sample consists mainly of palygorskite and dolomite. Illite, chlorite and quartz are also presented. It was also possible to see that the different types of disaggregation used showed no significant differences in the diffractograms of the samples. The sand-silt-clay separation, although only based on the size of the material, showed a reasonable efficiency for material separation, as the sedimentation tests, where it was noticed that after a 24 hours period, dolomite had disappeared from the supernatant. Determination of kinetic curve revealed that the adsorption period of 2 hours is not sufficient for phosphorus adsorption, requiring 24 hours to reach the reaction equilibrium. Sorption tests showed efficiency higher than 91% of the initial phosphorus present in solution, and the maximum quantity adsorbed per gram of sample was 0.607 mg. The correlation with the adsorption isotherm models studied, showed better results for Langmuir-Freundlich isotherm, with correlation coefficient of 0.9993, which can be attributed to the fact that adsorption occurs in more than one layer.
  • Carregando...
    Imagem de Miniatura
    ItemAcesso aberto (Open Access)
    Mineralogia e geoquímica da ocorrência de palygorskita de Alcântara, bacia de S. Luís-Grajaú, Maranhão
    (2011-12) AMORIM, Kamilla Borges; ANGÉLICA, Rômulo Simões
    The Alcântara Formation (S. Luis-Grajaú Basin, Alcântara region, northern Brazil) is mainly constituted by mudstones, sandstones and limestones. These lithotypes represent a progradacional succession of lagun/washover and tidal channel deposits that overlap huge shoreface deposits. The main purpose of this work is to carry out a mineralogical and geochemical characterization of the clay minerals association related to the pelitic rocks of the Alcantara Formation, specially the known palygorskite occurrences. One geological profile was sampled (eight samples) and described at the Baronesa beach (Alcântara city). The samples were submitted to mineralogical and chemical analysis by means of the following techniques: X-ray diffraction, X-ray fluorescence, thermal analysis (TG-DTA) and scanning electron microscopy. The results showed that the Baronesa Beach profile is mainly composed by sandstones at the base, followed by mudstones with intercalations of limestones. A wide clay mineral assemblage was described in a lagoon environment, with different contents of palygorskite, chlorite, illite, smectite and traces of kaolinite. Small amounts of dolomite, calcite and feldspars were also observed. The genesis of these minerals assemblage are mainly related to arid to semi-arid climatic conditions during the deposition period, with high evaporation rates. Two generations of palygorskite were described: (1) white macroscopic accumulations easily observed in the field and frequently described in the literature; and (2) massive accumulation, as the dominant mineral, in the upper muddy levels of the Baronesa Beach profile. This second generation is described for the first time in this work, and may constitute metric levels with potential economic interest.
Logo do RepositórioLogo do Repositório
Nossas Redes:

DSpace software copyright © 2002-2025 LYRASIS

  • Configurações de Cookies
  • Política de Privacidade
  • Termos de Uso
  • Entre em Contato
Brasão UFPA