Navegando por Assunto "Pilares"

Agora exibindo 1 - 2 de 2

Acesso aberto (Open Access)
Monitoramento de pilares em edifícios altos de concreto armado
(Universidade Federal do Pará, 2010-06) NAHUM, Kelly Ataide Rodrigues; OLIVEIRA, Dênio Ramam Carvalho de
The structural behavior simulated by computer programs can be very different from reality, once the adapted loading distribution (regular) is far from the real one, and this disparity becomes more significant in high buildings because of vertical and horizontal actions which contribute to the global effects of second order for columns, making accuracy in the calculation of great importance for the stability of the overall structure. In this work are presented loads for a high building simulated using the commercial software CAD/TQS and the loads from the monitoring of 7 columns that received 3 extra bars along their height in two levels before concreting. In the steel bars were set electric strain gages to measure the strains. The data acquisition was performed through 1 module “Spider” that gets and stores the read- ings. The measurements were executed in periods previously chosen until the end of the structure building, including upper reservoir. The computation loads for the columns were satisfactory when compared to the loads from the strains and characteristic mechanical properties of the materials.
Acesso aberto (Open Access)
The Collapse of Real Class building
(Universidade Federal do Pará, 2018-04) RIBEIRO, Renan José da Costa; OLIVEIRA, Dênio Ramam Carvalho de
This paper describes the scene of the Real Class building collapse, a residential building with reinforced concrete structural system and located in the urban area of the city of Belem / PA, occurred in 2011. The unconformities found in the building are displayed using data extracted from reports and verification of structural and architectural designs. The data was compared with the Brazilian code for reinforced concrete structures, NBR 6118 (2007), valid at the time of the accident. The security of the building was evaluated through a computer model with linear analysis with the software used by the designer. The conditions of the structural system designed and as built was evaluated with parameters of global stability and load capacities of columns and foundations. The results showed that the structure of the building was subject to large displacements and the sections of columns were unable to resist the stresses produced by regional wind actions.