Navegando por Assunto "Quality factor"

Agora exibindo 1 - 2 de 2

Acesso aberto (Open Access)
Portas lógicas totalmente ópticas baseado em interferômetro de Michelson com amplificador óptico semicondutor
(Universidade Federal do Pará, 2018-08-24) OLIVEIRA, Jackson Moreira; COSTA, Marcos Benedito Caldas; http://lattes.cnpq.br/7636226766852440
In this work, proposes all-optical logic gates device structure based on a Michelson interferometer (MI) composed of semiconductor optical amplifier (SOA) forming a structure of SOA-MI logic devices with symmetrically identical Fiber Bragg Grating (FBG) at the output of each of its arms, for numerical simulation of the all-optical AND, OR and NOR logic gates of two binary input signals with different bit numbers using the cross-gain modulation (XGM) technique at 10 Gb/s bit rate and filter bandwidth at 10, 20 and 40 GHz using OptiSystem 15.0 software by OptiWave Corporation, to demonstrate and extract simple design rules for high-speed optical processing and analysis of non-linear SOA-induced properties. In addition, this work includes the study of the effect of bandwidth and number of bits on received power, minimum bit error rate (BER), maximum quality factor (Q-factor), Optical Signal to Noise Ratio (OSNR) and optical spectrum, which demonstrates high-speed gates and performance. Were run the SOA-MI-based logic gates with some parameters and the results can demonstrate a structure of high-performance optical logic devices with high speed.
Acesso aberto (Open Access)
Regenerador 3r totalmente óptico baseado em interferômetro de Mach-Zehnder de fibra de cristal fotônico altamente não linear
(Universidade Federal do Pará, 2017-05-26) SOUSA, Fabio Barros de; COSTA, Marcos Benedito Caldas; http://lattes.cnpq.br/7636226766852440
The present work aimed to investigate by means of numerical simulations, a device able to perform 3R regeneration (Re-amplifying, Re-timing and Re-shaping) fully propagated signal in an optical communication system for optical fiber with bit rate of 10 Gbit/s, the initial transmit power 0 dBm and wavelength of 1550 nm. As an ally to the regeneration process using dispersive and nonlinear effects of self-phase modulation (SPM), cross-phase modulation (XPM) and four-wave mixing (FWM) in a Mach-Zehnder Interferometer, whose one of the arms is composed of a Highly Nonlinear Photonic Crystal Fiber (HNL-PCF). The simulations were performed using OptiSystem commercial software of company canadian Optiwave Corporation. System performance was analyzed by comparing the values of the quality factor (Q-factor), of the bit error rate (BER), of optical spectrum and the optical signal-to-noise ratio (OSNR) optical signals are regenerated, before regenerated and degraded in the entrance and exit of the proposed system. Through this project, it was possible to obtain an efficient signal regeneration, with optimal values of OSNR, quality factor (Q-factor) and low bit error rate (BER).