Navegando por Assunto "Rejeito da Construção Civil (RCC)"

Agora exibindo 1 - 3 de 3

Acesso aberto (Open Access)
Estudo e avaliação do uso de resíduos do processo Bayer como matéria-prima na produção de agregados sintéticos para a construção civil
(Universidade Federal do Pará, 2010-03) SOUZA, José Antônio da Silva; QUARESMA, João Nazareno Nonato; http://lattes.cnpq.br/7826389991864785
The large amount of solid waste coming from mines and metallurgical industries became a serious social-environmental problem. The physical and chemical features of this material can raise a great interest in other industries. The ceramic industry might be a great costumer for most of this material, since it can supply the current lack of raw material. The red mud, main industrial residue of the alumina manufacturing, has been a very interesting input for several kinds of aggregates manufacturing used for the concrete production in civil engineering. In this context, this paper deals with studies concerning the red mud recycling to be applied as raw material for the synthetic light aggregate production to be used as an alternative material in the civil construction industry. This is because of its physical-chemical features and the large amount annually produced (around 10 million tons within two factories in the North of Brazil). The studies completed in this work show the feasibility of aggregates manufacturing, with different properties and possibilities. These properties depend on the parameters control such as content of free silica and clay, and the sintering temperature. Such variables allow to perfectly controlling the glassy phase formation which is responsible for the aggregate properties such as: porosity, mechanical resistance and density. This material can be used for conventional or special concretes to supply the civil engineering needs.
Acesso aberto (Open Access)
Influência de aditivo polimérico no comportamento mecânico e reológico das argamassas produzidas com rejeitos industriais
(Universidade Federal do Pará, 2015-05-12) SILVA, André Luis Mileo Ferraioli; FELIPE, Augusta Maria Paulain Ferreira; http://lattes.cnpq.br/8871741271063047; SOUZA, José Antônio da Silva; http://lattes.cnpq.br/6157348947425968
Mortars are considered to be particulate systems in suspension with fine aggregate, binder, water and organic polymeric additive. Factors such as granulometry, cement, ash and additive contents in their composition influence mortar properties in both the fresh and hardened states. A rheological study and mechanical test were performed on mortar prepared for floors and coatings through incorporating civil construction wastes (RCC) such as fine aggregate and fly ash, a mineral waste derived from combustion in boilers at the HYDRO ALUNORTECompany. This study seeks to develop a polymeric mortar that uses CPII E-32RS Portland cement andflyashas binders and fine sand and RCC with polyvinyl acetate (PVA) as aggregates. A study was performed on the influence of cement, ash, granulometry of aggregates and use of PVA based-polymeric additives on mortar properties.The materials were submitted to physical and chemical characterization using granulometric analysis, X-ray fluorescence and FTIR. In preparing the specimens, 6 formulas with 5% cement and 3 formulas with 10% cement were used, both with different levels of ash, sand and RCC andmaintaining a constant level of Portland cement content. A comparison of the mechanical and rheological properties of formulas with and without PVA was also made.Formulas in a fresh state were submitted to rheological tests. After 28 days of curing specimens of these formulas, by then in a hardened state, were submitted to tests for mechanical resistance to compression, specific mass, apparent absorption and apparent porosity. The research demonstrated that employing a PVA-based polymeric additive improved the mechanical properties of the mortar prepared with industrial wastes, as well as guaranteeing satisfactory rheological behavior for possible applications of such mortars in civil construction.
Acesso aberto (Open Access)
Reciclagem de resíduos industriais na fabricação de argamassas e placas cerâmicas premoldadas fabricadas a partir de matriz sílico-aluminosa destinadas a construção civil
(Universidade Federal do Pará, 2014-05) CARVALHO, Ronaldo Nonato Ferreira Marques de; MACÊDO, Alcebíades Negrão; http://lattes.cnpq.br/8313864897400179; SOUZA, José Antônio da Silva; http://lattes.cnpq.br/6157348947425968
It is proposed to manufacture plates in structured network of PVC pipes, filled with mortar composed of rejected materials of civil construction, and coal fly ash, hydrated lime and Portland cement, inspired by the traditional technique of earth construction called “taipa de mão”, employed in the State of Pará, Brazil. The final product is a contemporary and ecological construction system for the execution of partition panels, aiming the decrease and the reuse of waste construction’ materials, whose disposal causes environmental damage. The rejected materials have physical-chemical characteristics which allow its recycling, increasing the duration of their Life Cycle. Aiming to develop mortar’s material having characteristics as plasticity, elasticity and mechanical strength were made experiments with traces consisting of construction waste and Portland cement, duly processed and dosed for the confection of test bodies. These were submitted to the tests absorption of water, porosity, density, compressive strength and toughness, resulting in the selection of the most appropriate compound, in respect to use in manufacturing mountable ceramic plates for use in partition panels. The plates were submitted to the tests of compression and tension.