2022-11-172022-11-172018-02-02BRITO, Woshington da Silva. Ativação alcalina para a produção de geopolímeros a partir de resíduos industriais. Orientador: José Antônio da Silva Souza. 2018. 99 f. Dissertação (Mestrado em Engenharia Química) - Instituto de Tecnologia, Universidade Federal do Pará, Belém, 2018. Disponível em: http://repositorio.ufpa.br:8080/jspui/handle/2011/15010. Acesso em:.https://repositorio.ufpa.br/handle/2011/15010The sustainable construction of the future, and has low energy consumption and greenhouse gas emissions must also adopt the principle of reuse of wastes impacting the environment generated by the productive chain. The aluminum production chain has as one of the leading waste impact on the environment the gray generation. The present study focused on the research and development of a cement-based material. Refers to an inorganic polymer, formed by the activation of amorphous aluminosilicates (Al2O3. SiO2), which react in a strongly alkaline medium, called geopolymer. As a raw material furnace fly ash, mineral residue from the combustion of the boilers of the company of the municipality of Barcarena-PA; As a source of aluminosilicate, and the kaolin that underwent the process of burning at 800 ºC that became metakaolin; And the alkaline medium of sodium silicate (Na2SiO3) and sodium hydroxide (NaOH), used as activators. As fly ash partially crystallizes during burning and loses some of its amorphous state, so are its reactive properties to chemically combine during the geopolymerization reaction are reduced. To increase reactive properties of fly ash and added metakaolin. As the main analyzes, no X-ray diffraction (XRD), X-ray fluorescence (FRX), scanning electron microscopy (SEM) and EDS. Tests of resistance to compression of the traces in the hardened state were also carried out and the rheological test of the geopolymer was carried out at the start of the reaction in the fresh state. For Davidovits ratios in the range of 2.5 to 3.23, the best geopolymers with compressive strength were obtained reaching 25 MPa in 24 hours of cure. For 60 days of cure at room temperature the geopolymers reached a resistance of 45, 36 MPa. The research carried out through the characterization analysis of the samples and the mechanical and rheological tests were presented in a satisfactory way and demonstrated that the residues of fly ash and metakaolin, when activated with sodium silicate and sodium hydroxide, are an alternative for the possible application of Geopolymer materials in construction.Acesso AbertoAttribution-NonCommercial-NoDerivs 3.0 Brazilhttp://creativecommons.org/licenses/by-nc-nd/3.0/br/Cinzas volanteMetacaulimAtivação alcalinaReologiaGeopolímeroFly ashMetakaolinAlkaline activationRheologyGeopolymerDissertaçãoCNPQ::ENGENHARIAS::ENGENHARIA QUIMICA::PROCESSOS INDUSTRIAIS DE ENGENHARIA QUIMICAENGENHARIA DE PROCESSOS INORGÂNICOSDESENVOLVIMENTO DE PROCESSOS