2019-11-212019-11-212019-03-21CARDOSO, Dilson Nazareno Pereira. Influência do uso de resíduos industriais nas propriedades mecânicas e reológicas de argamassas utilizadas na indústria da construção civil. Orientador: José Antônio da Silva Souza. 2019. 181 f. Tese (Doutorado em Engenharia de Recursos Naturais da Amazônia) - Instituto de Tecnologia, Universidade Federal do Pará, Belém, 2019. Disponível em: http://repositorio.ufpa.br/jspui/handle/2011/12083. Acesso em:.https://repositorio.ufpa.br/handle/2011/12083The general objective of this work was to develop alternative and usable materials within the construction industry, addressing a logic of recovery and reuse of solid waste, generated from construction and demolition construction sites, as well as the reuse of waste generated from the construction industry mining industry and mineral processing. Were used in the work the residue of construction (RCC), residue of sulfide copper ore (RMCS) and the waste of circulating fluidized bed boilers from the combustion of coal to fly ash (CV). The samples of these materials showed appropriate characteristics, such as recycled fine aggregate within the NBR 7211 standard. The materials were subjected to physical and chemical characterization through laser particle size analysis, x-ray fluorescence (FRX), diffraction and x-ray (DRX).). The mortars produced were studied in the free state, that is, without additives and also within the insertion of polymeric organic additive polyvinyl acetate (PVA) and Styrene Butadiene (SBR). The obtained mortars were physically characterized through the analysis of apparent porosity, water absorption, apparent specific mass and resistance to axial compression. Thermal analyzes of (TG and DTG) and scanning electron microscopy - SEM were also performed. In the fluid state rheological tests were performed to evaluate its behavior according to time (thixotropy), workability and the most representative rheological model for its flow. The developed materials presented technical properties approved by the ABNT standards, making them suitable for certain types of applications, in terms of laying and covering of walls, floors and ceramic tiles, respecting the technical characteristics of these materials.Acesso AbertoReaproveitamentoResíduos industriaisArgamassaCompósitos cimentíciosReuseIndustrial wasteMortarCement compositesTeseCNPQ::ENGENHARIAS::ENGENHARIA SANITARIA::SANEAMENTO AMBIENTAL::RECICLAGEM DE RESIDUOS SOLIDOSENGENHARIA DE PROCESSOSUSO E TRANSFORMAÇÃO DE RECURSOS NATURAIS