2020-01-302020-01-302019-10-24SANTOS, Wenderson Gomes dos. Estudo do processo de produção de bio-combustíveis via pirólise de resíduos de pneus. Orientador: Nélio Teixeira Machado; Coorientador: Sérgio Duvoisin Júnior. 2019. 240 f. Tese (Doutorado em Engenharia de Recursos Naturais da Amazônia) - Instituto de Tecnologia, Universidade Federal do Pará, Belém, 2019. Disponível em: http://repositorio.ufpa.br:8080/jspui//handle/2011/12255. Acesso em:.https://repositorio.ufpa.br/handle/2011/12255In this study, the pyrolysis process of waste tires was analyzed in the laboratory and pilot scales. In the lower scale, the temperature variation, the type of catalyst commercially obtained (CaCO3, Na2CO3 and Ca(OH)2), the type of catalyst synthesized / treated from industrial waste (LV 1M HCl, LV 2M HCl and zeolite of kaolin) and the concentration of the NaOH solution impregnated into the tire (0.5, 1 and 2M) in the yields and compositions of the tire pyrolysis oil (TPO). In the larger scale, the evolution of the physicochemical and compositional properties of the TPO’s during the thermal cracking process (T = 400 °C, T = 450 °C and T = 500 °C) was evaluated in order to obtain a liquid product with characteristics of fossil fuels and / or compounds of high commercial value. The results showed that the yield of the TPO's are influenced by the increase in process temperature, by the type of catalyst and by the chemical treatment in the raw material. Being the process at 500 °C and with kaolin zeolite as the catalyst which most optimized the process for the yield and production of aliphatic compounds in the TPO. The use of catalysts led to the reduction of aromatic compounds and sulfur compounds in the liquid fraction. On the smaller scale, the behavior of the aliphatic compounds in thermocatalytic processes and chemical impregnation of the raw material was strongly influenced by the composition of d-limonene in the oils of pyrolysis of tires. The results of the pilot scale allowed us to conclude that there were variations in the physicochemical and rheological properties during the cracking process, but tend to stabilize in 65 minutes of process, presenting low acidity and low viscosity. The main substances identified throughout the process were d-limonene, BTX (benzene, toluene and xylenes) and cymenes. In the fractionation of TPO’s, the fraction of gasoline (C8 to C10) and kerosene (C8 to C17) are essentially hydrocarbons, while light diesel (C15 to C21) and heavy diesel (C17 to C23) by heteroaromatics. It is also concluded that sulfur and halogen compounds tend to be separated from the light diesel range.Acesso AbertoResíduos de pneusÓleo de pirólise de pneuResíduos industriaisReologia de combustíveisLimonenoTire wasteTire pyrolysis oilIndustrial wasteFuel rheologyLimoneneTeseCNPQ::ENGENHARIAS::ENGENHARIA QUIMICA::TECNOLOGIA QUIMICA::TRATAMENTOS E APROVEITAMENTO DE REJEITOSENGENHARIA DE PROCESSOSUSO E TRANSFORMAÇÃO DE RECURSOS NATURAIS