2023-01-052023-01-052022-04-22RODRIGUES, Lino Alberto Soares. Análise das distorções e tensões residuais em painéis enrijecidos soldados com FCAW-robotizado e CW-FCAW. Orientador: Eduardo de Magalhães Braga: .2022. 188 f. Tese (Doutorado em Engenharia de Recursos Naturais da Amazônia) - Instituto de Tecnologia, Universidade Federal do Pará, Belém, 2022. Disponível em: http://repositorio.ufpa.br:8080/jspui/handle/2011/15110. Acesso em:.https://repositorio.ufpa.br/handle/2011/15110Once the influence of welding imperfections in the form of distortions and residual stresses on the resistance of stiffened panels has been proven, monitoring the levels of these imperfections becomes a safety criterion, in view of the uncertainty of the real resistance losses of the panel, without having to measure the magnitudes of these welding imperfections. Thus, this work deals with the measurement of distortion levels and residual stresses by X-ray diffraction and ultrasonic birefringence in stiffened panels. First, the best of three welding sequences were selected using robotic FCAW welding. Sequence 03 showed distortion levels up to 10 times less and a residual stress level closer to neutrality (±100 MPa) compared to sequences 01 and 02. Then, using sequence 03, panels were welded using the CW-FCAW process with 40% cold wire and welding speeds of 100 m/min and 120 m/min. The results showed that the percentage of cold wire with high welding speeds did not reduce distortions, but influenced the level of residual stresses, leading to stresses closer to the neutral line (±100 MPa) on average.Acesso AbertoAttribution-NonCommercial-NoDerivs 3.0 Brazilhttp://creativecommons.org/licenses/by-nc-nd/3.0/br/Painel enrijecidoDistorçõesTensões residuaisDifração de raios XBirrefrigência acústicaCW-FCAWFCAWStiffened panelsResidual stressesX-Ray diffractionAcoustic birefrigenceTeseCNPQ::ENGENHARIASENGENHARIA DE PROCESSOSUSO E TRANSFORMAÇÃO DE RECURSOS NATURAIS