2023-06-292023-06-292022-08-18COSTA, Natasha Cristina da Silva. Influência do fator de escala, diâmetro máximo e tipo de agregado graúdo na resistência ao cisalhamento de vigas de concreto armado sem armadura de cisalhamento. Orientador: Dênio Ramam Carvalho de Oliveira. 2022. 205 f. Tese (Doutorado em Engenharia Civil) - Universidade Federal do Pará, Instituto de Tecnologia, Belém, 2022. Disponível em: https://repositorio.ufpa.br/jspui/handle/2011/15779. Acesso em:.https://repositorio.ufpa.br/jspui/handle/2011/15779The present study evaluated the influence of different types and forms of coarse aggregates on the structural behavior of concrete beams with different useful heights (d) and the same base length (bw), in addition to the same longitudinal reinforcement rates (l) and dosages of concrete. For this test, it is necessary to carry out tests and tests that analyze the performance of some design codes and theoretical models in prescribing the most recent shear strength of reinforced concrete beams, without transversal reinforcement. Regarding the experimental study, 11 experimental tests of the stuttgart type were carried out until the pieces collapsed. The dimensions of the pieces were: (150 x 150 x 1400) mm, (150 x 250 x 1900) mm, (150 x 350 x 2400) mm and (150 x 450 x 2900) mm. The evaluated variables were, in addition to the geometric dimensions, the type, the dimension and the content of coarse aggregates used in the concrete dosages. When using the type of rolled pebble and a crushed stone. As for the dimensions used, pebble with maximum diameter (dmax) equal to 12.5 mm and gravel with two dmax: 9.5 mm and 12.5 mm were used. As for the content, in this work, the amount of engraved aggregate, indicated in the dosage, was reduced by 30%. In this research, transverse arms on all beams were removed, which were placed only on the supports and at the load application points to avoid damage caused by tension. In the analysis of the project codes, the requirements of ACI 318 (2019), EC2 (2004) and NBR 6118 (2014) were evaluated. It does not refer to theoretical models, discussed as proposals by MUTTONI (2019) and HUBER(2019). How to analyze besides evaluating the dispersion and conservatism of the results found, it also ranks the seconds according to COLLINS (2001) records, or the classification of demerit points -DPC. Finally, with a contribution proposal with a proposal for dimensioning reinforced concrete beams subject to shear stress, the present work presents a proposal for a correction factor, which considers the analyzed criteria, to decrease or variation coefficient calculation results based on the formulations analyzed. To suggest the proposed changes to ACI 318 (2019), EC2 (2004) and NBR 6118 (2014), two databases composed of beams tested to failure by shear were used. The first database was used to make interactions between the parameters evaluated, seeking results that would improve the normative predictions, regarding structural safety and data dispersion. And a second database was used to validate these modification proposals. The beams were numerically modeled in a computational software for non-linear finite element analysis. The calibration of the numerical models was made from the experimental results of the reinforced concrete beams tested in the experimental program of this thesis. Analyzing the models, it is observed that the numerical model was able to satisfactorily predict the experimental behavior of the beams.Acesso AbertoAttribution-NonCommercial-NoDerivs 3.0 Brazilhttp://creativecommons.org/licenses/by-nc-nd/3.0/br/CisalhamentoConcreto armadoFator de escalaAgregado graúdoShearReinforced concreteSize effectCoarse aggregateTeseCNPQ::ENGENHARIAS::ENGENHARIA CIVILESTRUTURAS E CONSTRUÇÃO CIVILENGENHARIA DE CONSTRUÇÃO CIVIL