2024-08-222024-08-222022-12-15RAMALHO, Rodolfo Vitorino Correia. Critério do coeficiente de pressão mínimo aplicado ao dimensionamento de bombas axiais: caso de estudo para um túnel de água circulante. Orientador: André Luiz Amarante Mesquita. 2022. 99 f. Dissertação (Mestrado em Engenharia de Infraestrutura e Desenvolvimento Energético) – Núcleo de Desenvolvimento Amazônico em Engenharia, Universidade Federal do Pará, Tucuruí, 2022. Disponível em: https://repositorio.ufpa.br/jspui/handle/2011/16432. Acesso em:.https://repositorio.ufpa.br/jspui/handle/2011/16432An analysis of the pressure coefficient on the suction side of blades is presented as a design criterium for axial-flow pumps. A CFD model is developed and validated from experimental tests available in the literature. The model uses the finite volume method through the commercial software Ansys CFX. In the criterion application step, the X-Foil software is used to determine the lift and drag coefficients of the blade profiles. A case study is presented for the dimensioning of axial-flow pumps for a large recirculation tunnel, to be used for testing vessels, naval structures and hydrokinetic turbines. Special attention is given to pump cavitation conditions. The criterion of the minimum pressure coefficient is then evaluated by the CFD model, showing good performance for the pump.Acesso Abertohttp://creativecommons.org/licenses/by-nc-nd/3.0/br/Bomba axialCFDCoeficiente de pressão mínimoAxial-flow pumpMinimum pressure coefficientCritério do coeficiente de pressão mínimo aplicado ao dimensionamento de bombas axiais: caso de estudo para um túnel de água circulanteDissertaçãoCNPQ::ENGENHARIAS::ENGENHARIA MECANICA::FENOMENOS DE TRANSPORTE::MECANICA DOS FLUIDOSENERGIAS RENOVÁVEISTECNOLOGIAS SUSTENTÁVEIS