2014-09-102014-09-102014-02-26FERREIRA, Keylla Castro. Estudo de parâmetros físicoquímicos para a produção de argamassas utilizando resíduos industriais e da construção civil. Orientador: José Antonio da Siulva Souza. 2014. 72 f. Dissertação (Mestrado em Engenharia Química) - Instituto de Tecnologia, Universidade Federal do Pará, Belém, 2014. Disponível em: http://repositorio.ufpa.br/jspui/handle/2011/5652. Acesso em:.https://repositorio.ufpa.br/handle/2011/5652The mortas can be considered as a mixture of the binders and aggregates with water, having capacity of the induration and adherence. Instead, it is suggested the production of mortas using civil construction waste, with plenty silicoaluminates, obtained in demolitions and reforms of build, and fly ash as material pozzolana, obtained of the combustion of mineral coal in fluidized bed boilers, in partial replacement of Portland cement. The civil construction wastes were benefited and characterized by X-ray spectrometry and X-ray diffraction. The fly ash was characterized by granulometric analyze and X-ray spectrometry. The mortars of the were prepared using the following compositions of RCC, 95, 90, 85, 80, 75 and 70%; CV of 0, 5, 10, 15, 20 and 25% e 5% of Portland CP II Z 32 cement. In all the compositions were put 0,8% of water and the rheological testing was used the same proportions residue (RCC e CV) with 35% water. The specimens were cured for 28 days and after were submitted physical trials of absorption, porosity and bulk density; mechanical trials of resistance to compression and analysis of X-ray diffraction and scanning electron microscopy. The results obtained show that the recycling of civil construction waste and the use of fly ash and RCC is a promising technique in production of mortas.porAcesso AbertoConstrução civilArgamassa de cimentoEntulhoResíduos industriaisPozolanasCinza volanteConstructionCement mortarRubbleIndustrial wasteEstudo de parâmetros físicoquímicos para a produção de argamassas utilizando resíduos industriais e da construção civilStudy of physicochemical parameters for the production of mortars using industrial and civil construction wasteDissertaçãoCNPQ::ENGENHARIAS::ENGENHARIA QUIMICA::PROCESSOS INDUSTRIAIS DE ENGENHARIA QUIMICA::PROCESSOS INORGANICOS