Dissertações em Engenharia Mecânica (Mestrado) - PPGEM/ITEC
URI Permanente para esta coleçãohttps://repositorio.ufpa.br/handle/2011/2342
O Mestrado Acadêmico pertence ao Programa de Pós-Graduação em Engenharia Mecânica (PPGEM) do Instituto de Tecnologia (ITEC) da Universidade Federal do Pará (UFPA).
Navegar
Navegando Dissertações em Engenharia Mecânica (Mestrado) - PPGEM/ITEC por Agência de fomento "CEFET/PA - Centro Federal de Educação Tecnológica do Pará"
Agora exibindo 1 - 2 de 2
- Resultados por página
- Opções de Ordenação
Dissertação Acesso aberto (Open Access) Influência dos parâmetros térmicos de solidificação na transição colunar/equiaxial em ligas do sistema Sn-Pb sob condições transitórias de extração de calor(Universidade Federal do Pará, 2007-07-04) MOUTINHO, Daniel Joaquim da Conceição; ROCHA, Otávio Fernandes Lima da; http://lattes.cnpq.br/0702326922309672; MOREIRA, Antonio Luciano Seabra; http://lattes.cnpq.br/0667768010106721This work carry out a theoretical experimental study about the influence of solidification thermal parameters on the columnar to equiaxed transition of Sn 5%Pb, Sn 15%Pb, and Sn 20% Pb and Sn 25% Pb alloys during the horizontal unidirectional solidification process cooled by water which considers the solute convection effects. The tip growth rates and cooling rates have been experimentally calculated and the obtained results are compared with those of a numerical model. The columnar to equiaxed transition position is determined through the macrostructure characterization of the studied alloys. The experimental results have shown that the thermosolutal convection influences the CET occurrence. Finally, a comparative experimental study is done for the studied alloys when directionally solidified in different water-cooled systems.Dissertação Acesso aberto (Open Access) Projeto, construção e aferição de um dispositivo de solidificação unidirecional horizontal refrigerado à água(Universidade Federal do Pará, 2007-04-16) SILVA, José Nazareno Santos da; ROCHA, Otávio Fernandes Lima da; http://lattes.cnpq.br/0702326922309672; MOREIRA, Antonio Luciano Seabra; http://lattes.cnpq.br/0667768010106721The aim is about the solidification structures of thermal parameters is important to mechanic behaviour of the metallic materials. These structures are influenced by means of heat removal conditions of metal/ mould system during the solidification process. Despite of this, some mathematic models have been developed to appraise the structural and thermal variation mainly considering the upright unidirectional solidification process. This research plans to project, construct and check up one device in order to be able to represent the horizontal unidirectional solidification process cooled by water which considers the solute convection effects. To check up the solidification device, a comparative study was done between the representative experimental bend of metal´s thickness solidification related to time to Al-4%Cu, Sn-5%Pb, Sn-15%Pb e Sn-20%Pb alloys. The present results shows positive consonances. The unidirectional aspect of the heat removal constructed was estimate trough the macrostructure characterization of the studied alloys. Finally a comparative study is done between values of the interface metal/mold heat transfer coefficient obtained trough other newly works developed about ascendant and descendent unidirectional solidification process.