Artigos Científicos - FEA/ITEC

URI Permanente para esta coleçãohttps://repositorio.ufpa.br/handle/2011/3359

Navegar

Agora exibindo 1 - 7 de 7

Acesso aberto (Open Access)
Aplicação de modelos matemáticos bi e tri-paramétricos na predição de isotermas de adsorção de umidade do guaraná (Paullinia cupana) em pó
(2000-04) PENA, Rosinelson da Silva; RIBEIRO, Claudio Cavalcanti; GRANDI, José Glauco
In this study, twelve mathematic models (six biparametrics and six triparametrics), applied in the prediction of isotherms, were studied on prediction of moisture adsorption isoterms of guarana (Paullinia cupana) powder obtained in spray dryer. The moisture adsorption isotherms of the product were fitted at 15° C, 25° C and 35° C, by nonlinear regression analysis, using the software STATGRAPHICS 5.1. The best results among studied models on prediction of moisture adsorption isotherms were GAB, modified BET and Anderson equations (triparametric), Handerson and Oswin equations (biparametric).
Acesso aberto (Open Access)
Caracterização e processamento de leite bubalino em pó em secador por nebulização
(2005-09) GUERRA, Roberta Batista; NEVES, Elisa Cristina Andrade; PENA, Rosinelson da Silva
This work aims to show the process development based on the spray dryer for the obtaining of powdered buffalo milk. For that, physiochemical analyses were made in the milk in natura and later in the powdered product, which was also submitted to microbiological analysis to be sure that it could be consumed by humans; and to sensorial analysis for obtaining information about the product's acceptance. Sorption isotherms for the powdered product were obtained at 25ºC with the purpose of perceiving the hygroscopic behavior. The buffalo's powdered milk presented the following characteristics: 3,4 % moisture content, 23,2% proteins, 46,1% fat, 4,2% ash, 0,5% soybean lecithin and 22,6% of total carbohydrates. The product was characterized as whole powdered buffalo milk, because it didn't suffer any standardization. Nutrient losses, during the process, were less then 5%, and just for proteins the variation was more than 15%. It can be justified by the desnaturation of the casein due to high temperatures (>80ºC). The powdered product presented type III sorption isotherms and the same behavior was observed for the whole powdered milk. Through sorption isotherms, the moisture content value, referent to the monolayer, was on an average of 4,4g H2O/100g dry solids, which confirms the process efficiency. The hysteresis behavior presented by the powdered product was similar of the whole powdered milk. The product acceptance was of 74%, close to the commercial powdered milk acceptance.
Acesso aberto (Open Access)
Comportamento higroscópico da farinha de pupunha (Bactris gasipaes)
(2003-08) FERREIRA, Cristiane Damasceno; PENA, Rosinelson da Silva
It was studied the hygroscopic behavior of the pupunha flour obtained by drying in the oven at 70°C. It was collected data of moisture adsorption for two temperatures (15°C and 35°C), using the static method, where the recipients with the capacity of 500mL, having saturated salt solutions, it was used as environment generators of constant relative humidity, ranging from 11% to 97%, which were submitted the samples of the product. From the equilibrium data, it was built isotherms of moisture adsorption, being observed type III isotherms, but even that the equilibrium moisture for the product decreases with the temperature increase. It was determined the isosteric heat of adsorption for different levels of equilibrium moisture and the equivalent moisture to the monolayer, which were inferior of 5g H2O/100 g s.s. It was verified the application of the GAB model in the equilibrium data prediction for the product. According to the results obtained, the pupunha flour shows low hygroscopicity, low affinity for water molecule.
Acesso aberto (Open Access)
Comportamento higroscópico do açaí e cupuaçu em pó
(2008-12) SILVA, Alessandra Eluan da; SILVA, Luiza Helena Meller da; PENA, Rosinelson da Silva
The aim of this work was to evaluate experimentally the adsorption and desorption isotherm of açaí (Euterpe oleracea) and cupuaçu (Theobroma grandiflorum) powders using a hygrometer AQUAlab3TE of Decagon. Three levels of temperature (15, 25 and 35 °C) were tested. The type III curves obtained suggest the materials are rich in carbohydrates. Four mathematical models were fitted to the experimental data, Handerson, Oswin, GAB, and modified BET by nonlinear regression analysis using the software STATISTICA for Windows 5.1B. The Oswin and GAB models were better fitted to the açaí and cupuaçu powder sorption data, respectively. The monolayer for açaí and cupuaçu powders was determined. The desorption heat of the açaí powder was also determined.
Acesso aberto (Open Access)
Comportamento higroscópico do resíduo seco de camarão-rosa
(2007-12) ASSUNÇÃO, Alan Barros; PENA, Rosinelson da Silva
A study was made of the hygroscopic behavior of the dry residue of pink shrimp (Peneaus subtilis), characterized as being rich in total proteins (42.59%) and ash (22.01%). Adsorption and desorption isotherms were plotted at 10, 25 and 40 °C. The monolayer and desorption heat values were determined and thirteen mathematical models were fitted to experimental data to predict the sorption data. The product presented Type II isotherms. The adsorption data indicated that the product's microbiological stability (aw < 0.6) would require the dry residue to contain moisture of less than 13.0 g H2O.100 g–1 dry solids in adsorption and 14.0 g H2O.100 g–1 dry solids in desorption. The monolayer's desorption values indicated that, in order to avoid unnecessary loss of energy, the residue should not be dried to a moisture level below 7.29 g H2O.100 g–1 dry solids. The values of desorption heat indicated that large amounts of energy were not required to dry the residue to appropriate levels of moisture to attain microbiological stability (aw < 0.6). The best models for predicting the sorption isotherms of the residue were Oswin and Halsey (biparametric); GAB, modified BET, Hailwood-Horrobin, Anderson, Anderson-Hall and Gascoyne-Pethig (triparametric).
Acesso aberto (Open Access)
Hygroscopic behavior of buriti (Mauritia flexuosa) fruit
(2011-12) MELO, Wellington dos Santos; PENA, Rosinelson da Silva; RODRIGUES, Antonio Manoel da Cruz; SILVA, Luiza Helena Meller da
The objective of this study was to perform an analysis of the characterization of buriti fruit (Mauritia flexuosa). Each part of the fruit (peel, pulp, and fibrous part) was analyzed and their hygroscopic behavior was evaluated to establish the drying and storage conditions. Adsorption and desorption isotherms were obtained at 25 °C to the monolayer value was estimated, and the application of the Halsey, Handerson, Kuhn, Mizrahi, Oswin, Smith, BET, and GAB models was evaluated to the prediction of the isotherms. The fruit pulp was classified as rich in high quality oil, and like the peel and the fibrous part, it was also considered as rich in dietary fiber. The isotherms of the fruit parts were classified as type II, and their microbiological stability (aw< 0.6) can be maintained at 25 °C if the moisture content is lower than 8.5, 7.3, and 11.0 g H2O.100 g-1 of dry matter (d.m.), respectively. The hygroscopic behavior showed that in order to ensure stability, the fruit parts should be packaged with low water vapor permeability. The monolayer demonstrated that the peel, pulp, and the fibrous part cannot be dried under moisture content lower than 5.9, 5.0, and 6.4 g H2O.100 g-1 d.m., respectively. GAB was the most adequate model to describe their isotherms.
Acesso aberto (Open Access)
Influência da temperatura nos parâmetros de modelos bi-paramétricos que predizem isotermas de adsorção de umidade do guaraná (Paullinia cupana) em pó
(1997-12) PENA, Rosinelson da Silva; RIBEIRO, Claudio Cavalcanti; GRANDI, José Glauco
Eight biparametric mathematic models of the literature and widely applied in the prediction of moisture adsorption isoterms were analised. The guarana (Paullinia cupana) powder used in this study, was obtained in spray dryer from a hidroalcoholic extract. The experimental points of the moisture adsorption isotherms of the product at 15°C, 25°C and 35°C were fitted by non-linear regression analysis. To study temperature effect in the parameters of the models were used linear, exponential, logarithmic and inverse regressions. They were also used to fit the software STATGRAPHICS 5.1. The Handerson, Oswin and Mizrahi equations presented the best results among tested models.

Navegar

Navegando Artigos Científicos - FEA/ITEC por Assunto "Adsorção"